GAS DETECTORS > ARSINE

GM/EC 2-Wire Gas Monitor with local stainless steel sensor head explosion proof (XP) configured for Arsine (AsH3) with range 0-1 ppm, 4-20 mA output transmitter.

The GASMAX / EC single channel Toxic / Oxygen gas monitor delivers the latest in loop-powered gas detection technology, reliability and ease of use. The GASMAX / EC is CSA certified for use in Div 1 & Div 2 explosion proof installations and intrinsically safe installations with IS barrier.

The highly visible display shows calibrated engineering values, bar-graph data, 30-minute trend and setup information. An internal real-time clock time-stamps calibration and alarm events for later review. Front panel flashing LEDs continuously indicate alarm conditions.

• Certified for use in Explosion Proof and Intrinsically Safe Installations.
• Non-polarized loop powered interface eliminates wiring errors.
• Non-intrusive one-person prompted calibration.
• Smart Sensors store calibration & alarm events.
• Real time clock tags alarm events.
• Aluminum sensor head available for reactive gases.
• See GASMAX II for local relays, LEL or MODBUS®.

Sensor Head Options

1. Local Stainless Steel - XP & IS
2. Local Stainless Steel (with splash guard) - XP & IS
3. Local Aluminum - IS ONLY
4. Local Aluminum (with splash guard) - IS ONLY
5. Remote Stainless Steel - XP & IS
6. Remote Stainless Steel (with splash guard) - XP & IS
7. Remote Aluminum - IS ONLY
8. Remote Aluminum (w/ splash guard) - IS ONLY

Notes:

1. Remote sensor installations do not utilize Smart Sensor interface
2. Maximum distance for remote e-chem sensor connection is 25ft (3m).
3. Maximun distance for remote LEL sensor connection is 300 ft.
4. Highly reactive gases REQUIRE aluminum sensor head and IS in hazardous area.

Operation and Maintenance Manual of the GasMax Detectors        Quick Start Guide

Operating Voltage	10-30VDC at less than 0.75 watts
Display	64 x 128 pixel LCD with 30-minute trend, bargraph and engineering units
Output	Standard 2-wire 4-20mA current sink output. Max loop R is 600 ohms with nominal 24VDC power supply.
Temp Range	-40°C to +65°C operating
Housing	Aluminum housing with epoxy paint standard; #316 stainless steel opt
Dimensions	Width 5.4” (137 mm), Height 8” (203 mm), Height 5” (127 mm). Shipping weight 6.5 pounds (3 kg)
Approvals:	CSA Certified Div 1 & 2 Groups B, C, D. Suitable for explosion-proof installations CSA Certified Div 1 & 2 Groups A, B, C, D. Intrinsically safe.
Warranty	Two years on electronics and one year on sensors from date of purchase
Typical Sensor Life	2 years

-$1,245.00