AMS   A001694

A001694   
Please Email us your request for quote   

The Standard In-Line Flue gas probe AMS 3211-500 is equipped with a Zircon dioxide sensor located in the tip of the probe. The Flue gas probe AMS 3211-500 can be used for the measurement of Oxygen in flue gases from gaseous, liquid and solid fuels and biomass. In Applications with solid fuels and biomass the Standard In-Line Flue gas probe AMS 3211-500 is equipped with an additional Stainless steel tube to protect the probe against abrasion. In combination with the Transmitter AMS 3220 the Standard In-Line Flue gas probe AMS 3211-500 is certified by the German TÜV according European and German environmental regulations and fulfils the requirements for QAL 1 according EN 14181 and EN ISO 14956.

All AMS Flue gas probes are equipped with Zircon dioxide sensors with Platinum electrodes which distinguish themselves by a long lifetime in the process. The location of the Zircon dioxide sensor at the tip of the probe guarantee extremely fast responses of the Standard In-Line Flue gas probe AMS 3211-500. The Transmitters AMS 3220 and AMS 5200 supply the current for the heater in the Zircon dioxide sensor. To increase the stability of the measuring values, the sensor temperature is regulated within low limits. Simultaneously the Transmitters AMS 3220 and AMS 5200 m

Typically continuous Oxygen measuring systems are consisting of a Flue gas probe with built in Zircon dioxide sensor, a Transmitter and a Pneumatic unit. The Pneumatic unit supplies continuously instrument air to the Zircon dioxide sensor which serves as Reference air. Via a second gas inlet port at the probe flange the Zircon dioxide sensor can be supplied with calibration gas to verify and correct the calibration of the sensor in regular intervals. The Pneumatic unit and the Flue gas probe are connected by two high pressure pneumatic hoses. A multi wire, protected cable connects the Transmitter to the Flue gas probe electronically. Due to the modular construction of the Oxygen measuring systems of AMS the Transmitter can be installed inside the housing of the Pneumatic unit. This reduces the required length of both high pressure pneumatic hose and protected cable. The power supply for the Transmitter and the Flue gas probe is also installed in the GRP-housing of the Pneumatic unit. The flue gas probe, the Transmitter and the Pneumatic unit are manufactured according to the protection class IP 65 for General Applications. The Standard In-Line Flue gas probe AMS 3211-500 is for universal use. For applications with corrosive flue gases all gas wetted parts of the probe are manufactured from Inconel 600. To replace an already existing continuous oxygen measuring system the Standard In-Line Flue gas probe AMS 3211-500 can be fitted with all flange sizes both in DIN and ANSI dimensions.

Optional the Standard In-Line Flue gas probe AMS 3211-500 can be equipped with time controlled back purge for high dust applications and with Auto-calibration for the automatic, time controlled calibration.