Application
The Headset-Kit permits the connection of a headset to the
weather-resistant telephone ResistTel. The headset improves
essentially the communication in ambient noise areas.
It protects against harmful ambient noise. It permits telephone
communication during activities where both hands are needed
The kit consist of:
- Headset with dynamic receiver insets, noisecompensating
electret nearfield response microphone with windshield and
gooseneck, as well as 80 cm smooth cord with connecting
plug.
- A14 m long connecting cord with a connecting jack at one
end and with wireends with wireend sleeves at the other end
to connect to the ResistTel.
- Cable gland M20 x 1.5 to lead the connecting cord into the
ResistTel.
- bracket and screws to hang up the connecting cord and the
headset.
Operation
onnect the plug of the headset to the jack of the connecting
cord and put on the headset. Adjust the height of each headset
muff equally on both sides while holding the headband down on
the top of the head until the ear cushions have a light and comfortable fit. The headband should sit straight and comfor table
on the top of the head. Adjust the flexible gooseneck so that
the microphone is positioned at a distance of approximately
5 mm (0.2”) in front of your lips. Optimal voice transmission and
the best possible noise compensation are then provided.
If the headset has been connected correctly, the headset mode replaces the handsfree mode of the ResistTel. For this reason
the handsfree mode of the ResistTel is not possible with connected headset. If you switch on the ResistTel with the loudspeaker key you are operating in headset mode. With the +/-
keys of the ResistTel you can change the receiving volume of
the headset for the actual conversation. If you want to change
the receiving volume of the headset permanently use the
ResistTel menu „SETTINGS_HEADSET VOLUME“.
) Reviews |
Write One
Newsletter
()